As recommended by kitchen cabinets Cape Cod, MA, take your time and do your job very well. Do not rush the process so that you do not end up with shoddy jobs, which might end up being costly as you would be forced to redo the job again.
Stripping off any paint from the metal cabinets will be the initial step. There are many ways to discuss this entire process if you want to start on this process. If you don't have a really difficult time, then the paint stripping components will work just fine for you. It can also go against what you intend to do, though, as you won't be able to figure out a way to remove the paint amicably. Afterwards, the paint would be easy to clean when the said cabinet is removed from the plastic paper. To remove the paint, you can use a wire brush. Nevertheless, if you want the best result, then a steel wire is best for fully removing the paint layer.
Step number two requires a primer that, when it comes to paint removal on metal kitchen cabinets, could work wonders. Since metal is very susceptible to rust and eventual corrosion, and to avoid this from occurring, primer acts as a sealant by sealing all the loopholes on the metal cabinets, which could lead to rusting.
It will prevent moisture from collecting on the metal cabinets into deadly damaging parts. In addition, supposing that you are trying to improve the color of your cabinets, by encouraging color retention, primer will work wonders. If you are using primers on metal cabinets, using a primer in a sprayer is one of the best ways to do it.
The actual painting itself is stage number three. And the use of spray paint is the easiest way to take this critical step. Therefore, if you want to do a decent job, then spraying the paint with thin layers at intervals is recommended. To ensure it does not drip down, care should be taken. After that, depending on how the job has been completed, leave it out to dry for about one hour or so. Do this for the next coating sessions consecutively, as well.
Those paints that do not have very deep colors need more coating, while those that do not have very deep colors need less coating. It is now time to leave your cabinets out to dry completely after you are done with the work. Maybe it's overnight or just a day. You should take the cabinets back to their original locations after it has dried out completely and you have ensured that the paint job has been amazingly completed.
There are a couple of important steps that you must not skip before you even start painting. Cleaning the cabinets until they are sparkling clean is the first one. This will eliminate any impurities on the surface of the cabinets that could prevent the paint from sticking well. Ensure that it has eliminated all the impurities and debris. Use removers such as (tsp) trisodium phosphate for the stubborn ones. It works wonders.
A clean surface will make your job really simple and will be devoid of any struggles and issues that will discourage you from working on your project properly. Leave the cabinets to dry for some time after the washing, before wiping some of the paint that may have loosened out again. For this part, you can either use a dry piece of cloth or a soft-bristled brush.
You should then go ahead and remove the doors and all the associated hardware after the inspection has been carried out, and you have taken note of the items to have for the mission ahead. However, others have permanent handles that can not come out, because many of the metal cabinets have different designs. The best thing to do with such types of handles is to paint them with the same color of paint that was used on the cabinet doors.
The process of restoring your kitchen cabinets is a very delicate one that needs careful preparation and, if you want a perfect job, must be completed with utmost precision. This will mean that you will not have to redo the job again, which could be really stressful and will eat into your precious time that you could have spent at home or some other position doing other equally important tasks.